CyberGuard SnapGear Guide d'installation télécharger pdf (Page 9)

7 Select an option for your LAN configuration:

–[Recommended] To manually configure your LAN and optionally

enable the SG unit's built-in DHCP server, which automatically

configures the network settings of PCs and other hosts on your

LAN, select Manual configuration.

– To use the SG unit's initial network settings (see page 5) as a

basis for your LAN settings, and not use the SG unit's built-in

DHCP server, select Skip: LAN already configured.

– [Not recommended] If you have an existing DHCP server, and

want to rely on the DHCP server to automatically configure the

SG unit's LAN connection setting, choose Obtain LAN IP

address from a DHCP server on LAN.

Note: Changes to the SG unit's LAN configuration do not take effect

until you complete the quick setup wizard.

8 Click Next.

– If you did not select Manual configuration, skip to step 11 on

page 10.

– If you selected Manual configuration, the Manual LAN

Configuration page appears. Continue to step 9 on page 10.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 31 32

Pas de commentaire

CyberGuard SnapGear Guide d'installation Page 9