CyberGuard SnapGear Guide d'installation télécharger pdf (Page 13)

17 Enter the Subnet Mask to use for the WAN port.

18 [Optional] Set the default Gateway Address.

19 [Optional] Set the IP address of the Domain Name Server (DNS).

20 Click Next.

– The Switch Configuration page appears for most models. In this

case, go to “Step 5 – Configure the switch” on page 14.

– If you are setting up a SG310, the Confirm Settings page

appears. Go to “Step 6 – Confirm settings; connect the SG unit

to your LAN” on page 15.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 31 32

Pas de commentaire

CyberGuard SnapGear Guide d'installation Page 13